Press Releases

New Products - RB500 Republic Centrifugal Blower

The new RB500 Republic Centrifugal Blower is able to produce up to 500 cubic feet per minute (CFM) with motor options from 3-horsepower to 7.5 horsepower.

Republic Blower Systems New Products and Accessories

Republic Blower Systems' extensive product line includes centrifugal and regenerative blowers, custom blower packages and enclosures, air knife systems, and numerous accessories. Over 90 percent of the parts and components for Republic Blower Systems are manufactured on-site at Republic's corporate headquarters in Dallas. This sets Republic apart from the rest of the industry as it allows for the highest level of quality control. Click Here to ready the entire story.

Republic Blower Systems Leads Industry in Technology, Capabilities and Innovation

Republic is constanly moving forward to embrace new technology, advance product offerings and adapt to changing marketing conditions. Republic is introducing several new products...Click Here to read the entire story.

Building a Better Blower

For the last 14 of their 44 years in business Republic Sales & Manufacturing has noticed the same reoccurring problems in drying systems.... Click Here to read the entire story.

Dallas, TX– Republic Blower Systems’™ extensive product line includes centrifugal and regenerative blowers, custom blower packages and enclosures, air knife systems, and numerous accessories. Over 90 percent of the parts and components for Republic Blower Systems™ are manufactured on-site at Republic’s corporate headquarters in Dallas. This sets Republic apart from the rest of the industry as it allows for the highest level of quality control.

Republic Blower Systems™ continued research and development will soon result in the release of two new centrifugal blowers. The new RB500 Republic Centrifugal Blower is able to produce up to 500 cubic feet per minute (CFM) with motor options from 3-horsepower to 7.5 horsepower. The RB500 will be available for shipment Sept. 1, 2005. The new RB3000 will be able to produce air flows up to 3000 CFM and is scheduled to be released late 2005.

Republic carries 2-inch, 3-inch, and 4-inch stainless steel air knives that are used in food applications or corrosive environments as well as 2-inch and 3-inch aluminum air knives. This is one of the most comprehensive air knife product lines in the industry. Republic offers customized solutions as Republic Air Knives can span up to 196” in length in either aluminum or stainless steel.

Republic Blower Systems is constantly adding new accessories. A new all-aluminum blower silencer, designed and engineered onsite, is now in stock and ready for delivery. This silencer will significantly reduce blower noise and provide additional blower protection. Republic’s field-testing proved that decibels (dB) ratings were reduced to 88-90 dB on an RB1200 blower with the additional of a silencer. A 3-decibel increase in noise represents a doubling of the noise level and is extremely noticeable to the human ear.

Republic’s stainless steel manifolds feature a single 4-inch inlet and multiple 2-inch or 3-inch outlets allowing customers to utilize up to six ports with multiple air knives on one system rather than using the single port on the blower. These manifolds allow for maximum system productivity.

Republic also introduced the new Universal Blower Stand for positive displacement (PD) blower packages. These new stands utilize a universal mounting base to fit any size motor.

 For more information on Republic Blower Systems, log on to http://www.republicsales.com or contact the corporate headquarters in Dallas at (800) 847-0380.

###

Republic Blower Systems Introduces New Products and Accessories to Line

Dallas, TX- Republic Blower Systems' extensive product line includes centrifugal and regenerative blowers, custom blower packages and enclosures, air knife systems, and numerous accessories. Over 90 percent of the parts and components for Republic Blower Systems are manufactured on-site at Republic's corporate headquarters in Dallas. This sets Republic apart from the rest of the industry as it allows for the highest level of quality control.

"We carry 2-inch, 3-inch, and 4-inch stainless steel air knives that are used in food applications or corrosive environments as well as 2" and 3" aluminum air knives. This is one of the most comprehensive air knife product lines in the industry." President Zach Goff said. "Since we manufacture the air knives onsite, we are able to offer customized solutions for our clients. We have manufactured various shapes such as rectangles and squares to allow the product to pass through the air knife. Republic Air Knives can span up to 196" in length in either aluminum or stainless steel."

The new Republic 2" Stainless Steel Manifolds features a single 4" inlet and multiple 2" outlets allowing customers to utilize up to six ports with multiple air knives on one system rather than using the single port on the blower. These manifolds allow for maximum system productivity and additional options for Republic manifolds include the selection of three to six outlets in either 2" or 3" diameters.

Republic Blower Systems is constantly adding new accessories. A new all-aluminum blower silencer, designed and engineered onsite, is now in stock and ready for delivery. This silencer will significantly reduce blower noise and provide additional blower protection. Republic's field-testing proved that dB ratings were reduced to 88-90 dB on an RB1200 blower with the additional of a silencer. A 3-decibel increase in noise represents a doubling of the noise level and is extremely noticeable to the human ear.

Republic also introduced the new Universal Blower Stand for positive displacement (PD) blowers. These new stands utilize a universal mounting base to fit any size motor.

"There are several different facets in the area of blowers and pumps that need silencing or customize enclosures and stands and Republic meets these specialized needs for our customers," owner George Goff stated. "Within our vacuum pump and blower product lines, we are constantly building custom packages."

For more information on Republic Blower Systems, log on to http://www.republicsales.com or contact the corporate headquarters in Dallas at (800) 847-0380.

Republic Blower Systems Leads Industry in Technology, Capabilities and Innovation

Dallas, TX-Republic Blower Systems exemplifies the concept of a successful family business in today's competitive marketplace. Republic is constantly moving forward to embrace new technology, advance product offerings and adapt to changing market conditions. This family-owned manufacturing firm has found a dedicated fourth generation driven by President Zach Goff and the hunger for unlimited success.

"My background is a combination of manufacturing and distribution," said George Goff, owner. "Much of the present company has been developed by the fourth generation. Zach's involvement has unleashed a concept far more expansive in nature. We were a regional company until the fourth generation assumed leadership, now we are a strong global company with expansive international business."

Incorporated as Southwestern Sheet Metal in 1950, the company quickly grew to one of the largest metal fabricators in North Texas by intentionally adapting to changing market conditions. The company became the in-plant contractor for General Motors, Proctor & Gamble, and other large industrial operations. To reflect the new direction it was taking, the company changed its name to Republic Sales & Manufacturing in 1962, repositioning the products and services offered to take advantage of market demand.

In 1991, with the newest generation of family members leading the operation, Republic took on the distribution of air equipment and the building of package systems that could incorporate various industrial functions simultaneously. After a number of years of extensive repairs and distribution of all types of air equipment, Republic discovered a mechanical design for centrifugal blowers and air knife systems. Republic's design offered distinct advantages over existing systems within the industry.

Engineering Manager Ben Valdez teamed up with Zach in 1999 to design and engineer the Republic Centrifugal Blower. Valdez's engineering experience spans more than 23 years in the industry.
"Our ceramic hybrid ball bearings set Republic apart from others in the industry and compliment the blower's performance as they are more durable, precise, and heat resistant," Valdez said. "These bearings are lightweight and low friction, which results in less heat generation and the bearing service life is two to five times longer than steel bearings."

Republic Blower Systems extensive product line includes centrifugal and regenerative blowers, custom blower packages and enclosures, air knife systems, and numerous accessories.

"Most of our competitors' product lines consist of either only centrifugal blowers or only regenerative blowers," Zach Goff said. "We carry both centrifugal and regenerative blowers and are able to offer good price levels while meeting our customers' needs for both large and small applications."

Republic manufactures over 90 percent of the parts and components for Republic Blower Systems on-site. This sets Republic apart from the rest of the industry as it allows for the highest level of quality control.

"Since we produce most of the parts ourselves, we are able to control and ensure the best quality," Valdez added. "We don't have to depend on outside vendors to ensure the quality of our products."
Republic's engineering and production departments use the latest CNC machines and technology. Engineering utilizes Autodesk Inventor, a leading industry software company, to produce 3-D solid model files. This 3-D concept allows for a fast, more efficient design process with precise measurements and rich details.

"We are constantly analyzing our product line for further improvements and innovations," Valdez said. "We utilize our distributor network and large customers for evaluation and additional product suggestions. This allows us to consistently meet the ever-changing needs of our customers."

Republic is currently developing two new centrifugal blowers to add to their line, the RB3000 and the RB500. The RB3000 will generate roughly 3000 CFM and allow customers with larger applications to use one blower rather than two. The RB500 will generate roughly 500 CFM for those customers with smaller applications or limited space for the blower.

"Our internal machines and in-house sheet metal facility allow us to manufacture higher quality enclosures and accessories," Zach stated. "We also carry 2-inch, 3-inch, and 4-inch stainless steel air knives that are used in food applications or corrosive environments. None of our competitors carry stainless steel air knives." Zach added that Republic Blower Systems is constantly adding new accessories. A new all-aluminum blower silencer, designed and engineered onsite, will be available Nov. 15. This silencer will significantly reduce blower noise and provide additional blower protection. Republic also introduced the new Universal Blower Stand this fall. These new stands utilize a universal mounting base to fit any size motor.

"There are several different facets in the area of blowers and pumps that need silencing or customize enclosures and stands and Republic meets these specialized needs for our customers," George stated. "Within our distribution of Rietschle Vacuum Pumps and Roots Positive Displacement Blowers, we are constantly building custom packages."

Undaunted by market attention that focuses on the latest high-tech firm, family-owned businesses like Republic prove the future looks promising for traditional enterprises willing to embrace the next generation while drawing on the core values that made the company successful in the first place.

For more information on Republic Blower Systems, log on to http://www.republicsales.com or contact the corporate headquarters in Dallas at (800) 847-0380.

###

.. As a certified repair facility for quality manufacturers, Republic sold and repaired the best blowers on the market, but the best just wasn't good enough. Last year they unveiled the result of years in research and development -- the new Republic Air Knife Drying System.

This new drying system incorporates fundamental design improvements that increase drying efficiency and lengthen blower life. These features mean greater air velocity, more precise air or gas control and less downtime for manufacturing processes and mission-critical drying installations. As predicted, the market has embraced the new Republic Air Knife Drying System.

The primary failure in blowers has always been the bearings. Bearings receive the greatest stress. Because they are custom-made for specific types of applications, frequently bearings require the entire head assembly be shipped back to the manufacturer for repair or replacement. The Republic Centrifugal Blower uses a permanently greased, ceramic-hybrid bearing with a wear life that is 2 to 5 times that of standard centrifugal blower bearings. The ceramic bearings allow for higher operating temperatures, optimal shaft/impeller performance and reduced vibration levels. When such bearings do wear out, the user can quickly replace the parts because the Republic bearing housing assembly is designed for easy maintenance and part replacement.

Secondly, Republic found that a common failure in the field occurred because the seals around the bearing shaft would leak, allowing contaminants to enter the head assembly. Specially designed PTFE Tri-Lip seals now protect the precision shaft and bearing housing, which itself incorporates unique design features to extend part life and increase efficiency.

Once these major product improvements were made, Republic focused on the less obvious flaws that plague most drying systems. Common headaches such as excessive belt wear, pulley failures, weak structural components, and inefficient product testing before shipping were all analyzed and improved.

The Republic Air Knife Drying System includes such standard features as: a self-adjusting belt tensioner that precisely wraps the pulley assembly, a hard anodized blower pulley and a blower pulley made from wear-resistant stainless steel. The cast 356-T6 aluminum housing and a compact design mean a smaller footprint for low profile applications such as PC board washer/dryer units or the base of machine/part cleaners -- additional benefits that are pleasing users. Best of all, every Republic blower is 100% run-in and tested before shipment.

"Our goal was to develop the drying system we would want if we were responsible for drying bottles prior to labeling, or removing the rinse/cooling solutions from precision machined parts or critical electrical components. Drying systemsare so common in the manufacturing process that nearly every company depends on this process. With all of the advances in manufacturing technology, we felt it was time to leap beyond the irritants so common in drying systems today. Our customers deserve the time and effort we've put into this new system. Were proud to offer what we feel is the best air knife drying system on the market," said Zach Goff, president of Republic Sales & Manufacturing Company.

The new Republic Air Knife Drying System can be purchased from your local Republic Distributor, or call 1-800-847-0380 for more details.